I also installed a new rope on the saw. I pressure and vacuum tested everything and it checked perfect. Sent it to the Park service and they ran 3.5 tanks through it.I rechecked the vacuum/pressure on the saw and it tested perfect again. I ran a half tank through it after tuning it to 12,000 rpm. This is a very nice saw with a new carburetor and is an awesome runner. I don't turn these saws up hot because I like for them to live and I would not be surprised a bit if the compression will go up a little on the next few tanks as long as the operator doesn't have the bad habit of running the saw out of fuel. This is one of the very best models this company ever made and if I had a choice I would keep every 036 I get.
This saw is ready for work and will be awesome as a pulpwood saw, logging saw, or firewood saw. Very, very clean saw and sharp looking.My feedback speaks for itself. Please contact me with any problems. I have recently had two issues where neutral feedback was left and I will make every attempt to fix the situation if you will contact me with the problem first. If you have never had a Stihl or Husqvarna saw, they do not crank on the first pull, and will flood out if they are left on choke position after the engine hits.
I dont have time to try to teach someone how to crank a saw nor do I care to explain how to air out a cylinder that someone inadvertently flooded because of the choke being left on and still trying to crank after the engine hits. A dealer will be more than happy to help you crank it the first time if you are not experienced with Stihl products or watch one of the videos on Youtube. If you have any questions, feel free to contact me.The item "Stihl 036 Pro timber saw, makes 191 psi and is ready to go to work, very nice" is in sale since Saturday, August 3, 2019. This item is in the category "Home & Garden\Yard, Garden & Outdoor Living\Outdoor Power Equipment\Chainsaws". The seller is "sincityfabricationofky" and is located in Arlington, Kentucky. This item can be shipped to United States.